Research on Crop Irrigation Schedules Under Deficit Irrigation—A Meta-analysis

Water Resources Management - Increasing water consumption in agriculture due to global climate change has posed considerable challenges to food security, thus improving the efficiency of water...     

Non-keyhole Friction Stir Welding for 6061-T6 Aluminum Alloy

A novel non-keyhole friction stir welding technique was proposed to weld the butt joint of 6061-T6 aluminum alloy with the thickness of 6 mm. A sound joint was obtained by this technique, simultaneously eliminating the flash, shoulder mark and keyhole defects. The sleeve directly affected zone (SDAZ) and the sleeve indirectly affected zone (SIAZ) were divided into the joint according to the plunging position of the hollow sleeve. The lack of root penetration defect was avoided when the plunging depth of the hollow sleeve was only 4.2 mm, because the hollow part inside the sleeve improved the material flow below the sleeve. An S-shaped line was left at the SIAZ, and the height of it had the minimum value of 1.47 mm at 20 mm/min. Whether the failure location of the joint was in SIAZ/SDAZ or the heat-affected zone (HAZ) depended on the height and bonding strength of the S-shaped line. The joint fracture location changed from the SIAZ/SDAZ at 35 mm/min to the HAZ at 20 and 30 mm/min. The maximum tensile strength of 224.3 MPa was obtained at 30 mm/min which was 73.7% of that of the base material. The fracture surface morphology exhibited the typical ductile fracture.     

Novel silicon-contained lignin-based carbon fibers derived from bamboo pulping black liquor with improved electrochemical performance for supercapacitors

Carbon fibers (CFs) are a promising candidate as electrode materials for flexible supercapacitors given its light weight and moderate cost. In this study, the lignin used was partially separated from kraft bamboo pulping black liquor and the higher molecular weight fraction, unavoidably contains a small amount of silicon compounds, so named silicon-contained lignin. Novel CFs were prepared using commercial polyacrylonitrile (PAN) and the lignin by electrospinning and further carbonization. Even in the presence of silicon compounds, the fibrous morphology of precursor fibers was significantly good, and the CFs with uniform fiber diameter and high specific surface area up to 182 m²/g were obtained with an increase in silicon-contained lignin. The CFs fabricated from silicon-contained lignin and commercial PAN had higher specific capacitance (22.20 mF/cm² at 10 mA/cm²) and superb cycling stability (94.21%) than that from silicon-free lignin or pure PAN separately.     

Preparation of magnetic zeolite/chitosan composite using silane as modifier for adsorption of Cr(VI) from aqueous solutions

This study aimed to prepare an efficient, cost-effective, and separable magnetic zeolite/chitosan composite (MZFA/CS) adsorbent from solid waste to deal with the water pollution of Cr(VI). The MZFA/CS was characterized by X-ray fluorescence (XRF), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD), and vibrating sample magnetometer (VSM) techniques. Then, the effect of pH, temperature, initial concentration of Cr(VI) ions, and contact time was considered in the study. For a sorbent dose of 0.1 g in 50 mL of a Cr(VI) solution, at a contact time of 30 min, temperature of 30°C, and a pH of 3, an adsorption capacity (q_e) of 16.96 mg g⁻¹ was achieved. Adsorption kinetics and isotherm data obtained for all adsorption systems were well-fitted by pseudo-second-order and Langmuir models, respectively. The thermodynamic study suggested that the adsorption process is spontaneous and endothermic in nature. In summary, the adsorbent with better separability (Ms = 16.83 emu g⁻¹) and adsorbability was successfully fabricated.     

Effect of Y concentration and film thickness on microstructure and electrical properties of HfO2 based thin films

In this work, we introduced a simple solution processing method to prepare yttrium (Y) doped hafnium oxide (HfO₂) based dielectric films. The films had high densities, low surface roughness, maximum permittivity of about 32, leakage current < 1.0 × 10^?7 A/cm² at 2 MV/cm, and breakdown field >5.0 MV/cm. In addition to dielectric performance, we investigated the influence of YO_1.5 fraction on the electronic structure between Y doped HfO₂ thin films and silicon (Si) substrates. The valence band electronic structure, energy gap and conduction band structure changed linearly with YO_1.5 fraction. Given this cost-effective deposition technique and excellent dielectric performance, solution-processed Y doped HfO₂ based thin films have the potential for insulator applications.     

A selective organosilica membrane for ethyl acetate dehydration by pervaporation

Organosilica bis(triethoxysilyl) ethane (BTESE) membranes were explored for pervaporation dehydration of binary and ternary mixtures of ethyl acetate (EA) by undiluted sol coating combined with flash firing. Three BTESE membranes (M1, M2, and M3) were fabricated on macroporous supports by varying BTESE concentrations (0.5, 2.5, and 5 wt% BTESE, respectively) in polymer sols. The membranes were characterized by DLS, SEM, FTIR, XRD, contact angle, AFM, and pervaporation performance to discuss the effect of the BTESE contents in the polymer sol on the formation and dehydration performance of resulting organosilica membranes. It was found that 5 wt% loading of BTESE led to a highly selective membrane for dehydration of EA/H₂O mixture. Among the synthesized membranes, M3 delivered flux of 0.84 ± 0.05 kg.m⁻².h⁻¹ with a selectivity of >10,000 for EA/H₂O mixture (98/2 wt%) at 60°C. The time course of pervaporation dehydration for the EA/H₂O mixture (95/5 wt%) confirms the stability of BTESE membrane in the investigated time period of 120 h. Further, the membrane exhibited excellent selectivity larger than 10,000 for separation of ternary mixtures (90/2/8 wt%) of ethyl acetate/ethanol/water and n-propyl acetate/isopropanol/water respectively, the composition of which is similar to the top product of the distillation column used in the industrial esterification process. The best separation performance and excellent acid stability of BTESE membranes in this study suggest that the simple synthesis protocol of undiluted sol coating and flash firing will provide a cost-effective, quick, and efficient synthesis route for practical membrane based applications.     

稳定入窑生料喂料量的措施

水泥工艺中熟料煅烧要求五稳保一稳，其中入窑生料喂料量稳定是很重要的一项。当出现入窑生料量波动时，技术人员第一反应是检查计量秤的准确性，近年来，转子秤也开始推广应用于生料计量。笔者认为入窑生料喂料量稳定是一个系统问题，是需要多举措保证的，不是一个好的计量设备就能解决的，本文介绍我公司稳定入窑生料喂料量的措施。     

基于魅力工学的传统器物设计评价应用研究

目的 在传统器物的创新设计中,最重要的环节是了解消费者对所使用产品的不同感受与意向并转换为具体的设计要素.研究消费者心理的感性因素与传统器物设计元素之间的联系,确定设计要素,从而对产品进行创新设计,为提升传统器物附加值作出贡献.方法 以中国传统器物茶宠为例,首先对8位相关的茶宠专家进行访谈,通过魅力工学中的评价构造法整理并提取魅力因子,设计出问卷调查表;然后以访谈内容为依据,使用问卷调查法得到大众对茶宠的魅力评价,共回收84份有效问卷;最后应用数量化一类分析茶宠魅力因子影响权重.结果 得到了数量化一类统计表,选取了其中影响因素较大的魅力因子作为茶宠设计前的风格定调考量.结论 通过茶宠的研究案例证明了该理论的可行性,为未来传统器物的设计提供了更多元且新颖的设计依据.     

Achieving High Electroluminescence Efficiency and High Color Rendering Index for All-Fluorescent White OLEDs Based on an Out-of-Phase Sensitizing System

Sensitizing conventional fluorescence (CF) dopants with thermally activated delayed fluorescence (TADF) materials has achieved considerable progress, by which the advantages of TADF materials and CF dopants can be fully harnessed. However, the usually used co-phase configuration of CF dopant-engaged sensitizing systems often encounters exciton loss due to Dexter energy transfer (DET). Herein, an effective out-of-phase configuration is proposed to sensitize CF dopants in the fabrication of white organic light-emitting diodes (WOLEDs). Based on a new efficient sky-blue TADF luminogen DCP-BP-DPAC which has an electroluminescence (EL) peak at 486 nm and an EL efficiency of 26.6%, a green TADF material BDMAC-XT, and a red CF dopant DBP sensitized by BDMAC-XT through an out-of-phase configuration without interlayer, efficient WOLEDs are successfully fabricated. By further adopting orange TBRB or 4CzTPNBu as intermediate sensitizers, more efficient energy transfer to DBP is achieved via Förster energy transfer. Through step-by-step energy transfer and elimination of excess DET process, high-performance all-fluorescent WOLEDs are achieved, providing excellent EL efficiencies over 23.0%, and highly stable white light with a high color rendering index of 87. The outstanding EL performance and high-quality emission color demonstrate the great potential of the proposed out-of-phase design for sensitizing systems of WOLEDs.